|
New Design wired and wireless alarm systems, this alarm system transmit alarm message through the telephoneline (PSTN), deal with the alarm information immediately and can be remote operated by telephone, thus to protect the user's personal and property safety, with its advanced function, attractive design, strong anti-destructive and easy operation, the alarm system can be used in many commercial sites and residential, business shops, offices, warehouse, institution units, hospital.
Main features:
# Flexible program: Users can set system parameter for his purpose.
# Big LCD, for easy operation, show time, armed, disarmed, telephone line status, alarm zone number etc.
# 16 wireless zones, 8 wired zones.
# Support up to four keyfobs.
# The wireless detector, keyfob and the control panel can be connected by enrol code.
# Up to 6 groups of alarm telephone number can alarm automatically, but the first number is for the central monitoring station; Intelligently identify whether the master received the report or not, and if received, no longer alarming.
# The panel can be connected with electronic sirens and alarm locally.
# Power off protection, all of the messages we set will be stored in its memory, never lost when power off, 20 events buffered.
# Low voltage reminding, when the AC is off or the backup battery voltage is low the panel will remind the user.
# Duress password. When the user is forced to disarm, input the duress password, then the panel will alarming silently and the LCD display disarmed.
# Alarm calling priority, the panel will cut off and send the alarming signal priority when the lince is busy.
# Operation ways: Each keyfob, telephone and keypad can be asigned to arm and disarm.
# Remote operation, it can be operated by telephone to arm, disarm and set programming output.
# The control panel can be used in stand-alone family or connected the network.
# Commnunication optional: ADMECO 4+1, Contact ID etc.
# Cut-line arming, the panel will trigger the siren once the line were cut, and the alarm information code will be displayed on LCD.
# Built-in or built-out backup battery optional.
# 2 programming output. You can control the electrical appliance and camera equipment when the alarm occurs. Proramming module need to be added when program this function.
# Sending test signal to the central station timely.
# The alarming time of siren is adjustable.
# Entry delay and exit delay adjustable, buzzer notice.
# Arm/Disarm upload function
# When dial-up alarm, the user can use the phone to location monitor
# Anti-thunder function
# 2 groups time arm/disamr automatically.
# Grade passwords for different users.
# Built-in real-time clock.
|
